The EliteNAS EN316L2D48DS is a comprehensive feature-dense 3U 16-bay 64-bit NAS + iSCSI rackmount with a 4.8GT/s Quick Path Interconnect Intel Xeon Quad-Core processor and 4GB DDR-3 ECC memory. The EN316L2D48DS is a performance tuned NAS+iSCSI server designed with hardware RAID protection and dual Gigabit Ethernet & 10GbE SFP+ connections, capable of unlimited clients with network share, and supports in IP SAN storage. The built-in SAS expander feature allows expansion of up to 7 additional EliteSTOR SAS Expander JBOD storage units, up to a maximum of 120 drives, making a total of 360TB total storage in a network sharing or iSCSI envirnoment. With 48TB right out out of the box and dual 10GbE SFP+ connection, the EN316L2D48DS is capable of fulfillng the most demanding storage needs.
Dual Gigabit & 10 GbE SFP+ and RAID Hard Drives Protection
EliteNAS is built with simple setup and maintenance features. An installation wizard for easy implementation, convenient web-based management for local or remote configuration, dual 10/100/1000 & 10GbE SFP+ network support for teaming or redundant networking, and hardware RAID support for your data storage make EliteNAS a simple trouble free unit. Dediated 1200MHz processor RAID engines support online migration and expansion, while offloading complex RAID calculations to improve overall performance.
SAS Expander support for storage expansion
Supported SAS expander, allow connections to 7 additonal SAS expander JBODs (EliteSTOR ES208X+BE, ES316X+B or ES424X+B), or up to 120 total drives for 360TB total stoage. (Optional Gateway License Required)
Support 6G SAS or SATA hard drives
Supports both high performance SAS hard drives or high capacity, low cost SATA hard drives.
Hardware RAID support up to 60
Supports latest RAID levels, including RAID 0, 1, 3, 5, 6, 10, 30, 50 and 60 for advance data protection in large number of hard drives deployments.
Feature Rich Network Storage - Built-in Snapshot, Folder Replication and iSCSI
In comparison to other NAS units in the market, EliteNAS is bundled with many additional advanced features at no additional charge. iSCSI target support for iSCSI applications, iSCSI initiator support for easy future expansion, NAS to NAS folder replication, scheduled or on-demand volume snapshot, and local tape backup support are just a few of the many features this product offers.
iSCSI Support for VMware and Microsoft Hyper-V
To take advantage of centralized storage for all virtual machines in VMware ESX or Vsphere, the EN316L2D48DS can be used as a focal storage point for the VMWare ESX or ESXi server hosting multiple virtual machines. Utilizing the EN316L2D48DS as an iSCSI target storage system for the VMware ESX/ESXi server, the EN316L2D48DS is ready for your VMware storage virtualization needs.
Microsoft Hyper-V virtualization environment is also supported. With the support of SPC-3, iSCSI can be used in Microsoft Windows Server 2008 or Windows Server 2008 R2 clustering environment for high-availability applications.
Optional NAS to NAS Automatic Server Failover and Mirroring
Server Failover and Mirroring (SFM) is an optional feature used to bind two EliteNAS servers as one so that data can be written to both systems simultaneously. At the same time, automatic fail-over will supported in case of primary system failure. Clients attached to the primary NAS server can be serviced by the secondary server and will not notice the fail-over process when the secondary EliteNAS takes over to provide high avaliablity redundancy.
Dual Port 10Gb Network Interface Controller for 10GbE Network Support
Dual port 10Gb Ethernet network Interface controller card is supported for 10Gb Networking. With 10 times faster bandwidth compare to 10/100/1000 Gigabit Ethernet, 10Gb network interface controller provides high performance solutions when needed. XFP, SFP+ and CX4 connectors are avaliable.
Dual 180GB SSD Mirrored 64-bit Operating System
For added reliability and extra performance, the EN316L2D48DS is built with a 64-bit operating system installed into two mirrored 180GB SDD drives. In the event of a OS failure, a back up hard drive is actively present to quickly replace the failed hard. The failed hard drive can be removed and replaced without any inturption of service offering the best in support for high availability situations.
Note: Please allow 3 days for rackmount testing before shipment.
- Supports IPV6 for more flexibility in allocating IP addresses and efficiency for routing web traffic.
- Multiple NAS Aggregation (single name space NAS expansion), allowing the integration of multiple or additional NAS units under a common root folder.
- OS mirroring along with the new management GUI interface.
- Highly efficient OS based on 64 bit Operating Systems.
- An intriguing Web GUI Using Web Browser GUI can configure, access and monitor the NAS/iSCSI.
- High file transfer rate for all types of protocols: NFS, AFP, CIFS, FTP, and iSCSI.
- Robust Journaling File Systems – XFS.
- File-sharing for clients in heterogeneous or mixed OS platforms is supported.
- Supported Protocol and Service:
- Supports Client File System – SMB, CIFS, NFS, AFP 3.1, FTP, SFTP.
- Support Network Transport Protocols – TCP/IP, SNMP MIBII, AppleTalk, NTP, DHCP, HTTP/HTTPS.
- Support Network services – DHCP, ADS/ADDS, NIS, LDAP, NTP Server.
- Support Teaming over 2 or more Gigabit NICs.
- Supports 7 modes of network port bonding: Teaming for Load-Balancing & Fail-Over, 802.3ad.
- Multiple Volume Snapshots, Schedulable & On-Demand.
- NAS-to-NAS Folder Replications: Scheduled Differential and Scheduled Full Copy with Compression.
- Include iSCSI target & initiator functions for IP-SAN infrastructure.
- Remote system monitoring for Fan status, Temperatures, RAID status, HDD status, Network connectivity status.
- Remote Monitoring and Remote Email Notifications.
- Auto email notification for pre-defined events.
- Supports storage quota assignment to group or to individual users, as well as warning when approaching quota full.
- Volume Snapshots supported - Supports multiple Snapshots for ‘point-in-time” user data image against accidental user file deletion and data corruption or virus attack. Snapshot can be scheduled and/or On-Demand
- Build-in iSCSI initiator – a new NAS act as an iSCSI target, and connect it into the existing NAS as if it is part of the local storage.
- Supports local folder creation under each root network share
- Multi-Level sub-folders supported.
- Network Share can be created based on volume or based on subfolder.
User Support and Security
- Maximum number of local user accounts: 60,000
- Maximum number of characters for user name: 31 characters
- Maximum number of characters for user password: 128 characters
- Local user account supported with “Home” Directory option
- Windows ADS / PDC / Workgroup supported
- Special feature supporting Windows ADS with large number user accounts.
- Multi User IDs supported for Windows ADS administrators
- ACL – Access Control List supported, Local ACL supported down to Folder-Level and File-Level.
- NIS – Network Information Services for Unix/Linux supported
- LDAP supported
- HTTPS/SSL Service supported
- Host (IP) filtering
NAS Administration
- A NAS discovery tool, NAS-Finder, will automatically discover any and all NAS units in the local network, and allow Administrator to manually add an entry for remote NAS unit over internet/VPN/WAN.
- Monitoring NAS resource utilization status via Web GUI.
- Monitoring On-Line Users and Folder-being-accessed via Web GUI
- Support system log to be downloaded and email to technical support personnel for further trouble-shooting.
- Support system configuration to be backup and restore
iSCSI Feature
- iSCSI Target function allows a certain portion(s) of the storage to be partitioned as iSCSI volume(s) and assigned to specific host computer, appearing as if a local disk to that host computer.
- Provides block level services (iSCSI) and file services (NAS) in a unified storage system.
- Build-in iSCSI initiator function allows the NAS to mount remote iSCSI target volume as its local physical storage, and expand its storage capacity
- Combination of iSCSI Target and Initiator support between multiple NAS units can be used as one of the method to do Multi-NAS-Aggregation for storage expansions
- Build-in Snapshot support iSCSI volumes
- iSCSI volume supports Microsoft Server 2008 R2 Failover Clustering (SPC-3) and VMware ESX/ESXi Server
Replication Feature
- Tower Based MN4LA+B and AN4L, as well as rackmount based EliteNAS Linux NAS series product line are fully interoperable for folder replications.
- Different models can replicate to each other.
- Scheduled or on-demand replication.
- Build-in Differential Replication allow deploy multiple units in different location via Internet/Intranet
- Building block of a total enterprise solution.
Optional Server Mirroring Failover for bare-metal mirroring and failover
- Server Mirroring Failover provide automatically failover in case of hardware failure.
- Mirroring function guarantee both primary and backup server have the same data.
- Eliminate downtimes, in event of failure, all traffic will automatically route to backup server.
- Support both iSCSI and NAS sharing
Hardware Specification
- Operating system specific design for NAS and iSCSI application
- Intel Xeon Quad-Core processor.
- 4GB ECC DDR-3 memory in Triple Channel.
- Supports 3.5" SAS or SATA hard drive.
- RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60 with spare.
- Dual 180GB SSD Hard Drives for OS Mirroring
- Dual Gigabit Ethernet ports.
- Dual 10 Gigabit Ethernet SFP+ ports.
- 1200MHz Hardware RAID controller card
- OS on DOM (Disk-on-Module) without mechanical wear and tear
- 16x 3TB Enterprise 7200RPM Hard Drives
| Model |
EN316L2D48DS |
| Form Factor |
3U Rackmount |
| Processor |
Intel Xeon Quad Core |
| Memory |
4GB DDR-3 ECC Memory |
| RAID Level |
Hardware RAID 0, 1, 1+0, 3, 5, 6, 30, 50, 60
with global or dedicated hot-spare |
| Maximum Capacity |
48TB (16x 3TB Enterprise Hard Drive Included), 2x 180GB SSD (OS Mirroring) |
| Expansion Slot |
Mini-SAS (SFF-8088) * 1
Up to 7 units or 120 total drives |
| Hot-Swappable |
Yes |
| Network |
On-board 2 x 1000/100/10
(Intel® 82574L Gigabit Ethernet Controllers)
Supports Teaming over 2 ports, 802.11ad, ALB; 2 x 10GBE SFP+ Connection |
| Hard Drives |
SATA x 16 |
| Power Supply |
650W 2+1 Hot-swap redundant power supply |
| Status Indicators |
Power and Overheat / FAN Fail LEDs
HDD Power and Activity LED |
| Dimension (in) |
5.25"(H) x 19"(W) x 28"(D) |
| Weight (lb) |
75lb |
| Certifications & Compliance |
FCC, CE, UL, RoHS |
| Limited Warranty |
3 Years - Enclosure; 5 Years - Hard Drives |
|
